Wavehorn is a floorstanding loudspeaker with a full range driver.
Wavehorn is a horn loudspeaker with drivers of Wavecor.
The kit is delivered with a Wavecor WF120CU07 midrange / bass driver (here as full range driver).
The loudspeaker has been developed by Bernd Timmermanns.
The crossover consists of two notch filters to reduce the loudness in the mid and highrange.
The frequency response is linear except un aberration at 150 Hz. The decay spectrum as shown in the waterfall diagram is free of any disturbing resonance. At a volume of 90 dB at 1 m, the nonlinear distortions below 0,5% above 200 Hz.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 199,00 excl. VAT: € 167.23 / $ 193.98
The high-end kit is delivered with baked varnish air core coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the fullrange driver are of type polypropylen (MKP) Clarity-Cap ESA 250Vdc.
Kit with high-end-crossover without cabinet, price per speaker EUR 249,00 excl. VAT: € 209.24 / $ 242.72
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. I-2765, price per unit: EUR 3,70 excl. VAT: € 3.11 / $ 3.61
We recommend one board per kit (two boards for a speaker pair)
Hobby HiFi Overview