Home Floorstanding
speakers
Shelf
speakers
Subwoofer Drivers 10asw 10 DSP 10-60 20

Alcone Sub 10 DSP (2016)

Alcone Sub 10
Technical data:
- power: 90/180 Watt (both possible)
- frequency range (-8dB): from 30 Hz
  (upper crossover frequency adjustable)
- max. sound pressure (1m): 104 dB
- size (HxWxD): 48 x 38 x 38 cm
- speaker type: bass reflex, 40 L
- impedance: 8 Ohm

The Alcone Sub 10 is a perfect addition to Alcone Lagrange XT or other satellite systems. Dimensions are 48 x 38 x 38 cm (HxWxD) containing an Alcone AC 10 HE with aluminium cone and a Audaphon AMP-24 amplifier with an output of 180 Watts (bridged) into 8 Ohm or 2 times 90 Watt into 4 Ohm.

The concept of the woofer is more than 18 years old: The reviewers of Klang+Ton 3/98 described the subwoofer as follows (together with another amplifier, which is no longer produced): "The Alcone Sub 10 subwoofer produces a very low, yet absolutely precise bass and shows an enormous power handling. Additionally, a full house of all sorts of imaginable features makes it easy for the user to operate the unit. This subwoofer has all that it takes to become a classic."


Audaphon AMP-24

Now in 2016 a new amplifier was added: Audaphon AMP-24. AMP-24 consumes as little as 0.5W in standby.

Frequenzgang

The frequency range (right hand) with a separation frequency of the amplifier module of 100 Hz (blue) and 60 Hz (red)

The Audaphon AMP-24 amplifier module is located at the rear of the cabinet. The module features state-of-the-art Class D amplification ensuring enormous power output with top quality sound, fitted in a small cabinet.

The plate amplifier provides:

Additional information on digital signal processors (DSP): what is a DSP?, Tuning according to room conditions and Examples Of DSP use (e.g. in subwoofers).

The kit consists of:

Alcone Sub 10 (without cabinet)   - not available (_)
 

Kit Alcone Sub 10 without amplifier

Alcone Sub 10

If you want to connect two cabinets to the amplifier Audaphon AMP-24 (it has two power channels), or if you already have a power amplifier for the subwoofer we recommend the following kit:

The kit consists of:

Alcone Sub 10 (without amplifier and without cabinet)   EUR 155,00 excl. VAT: € 130.25 / $ 149.79

Zurück zur Bausatzseite  
... more affordable: Sub10 ASW

Home