Competition TL   Floorstanding as in K+T 2/2015

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 91 dB
  • size (HxWxD): 1100 x 220 x 337 mm
  • frequency range (-8dB): 40 - 40000 Hz
  • crossover frequency(s): 2200 Hz
  • speaker type: transmission line

BPA Competition TML is a floorstander developed by Karl Heinz Fink and Thorsten Fischer.

Our kit consists of

  • Omnes Audio RT 2.0
  • 2x Tang Band W6-623C paper mids/woofer
  • PE sealing tape, 5x2 mm
  • 2x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated [one pair, red and black]
  • 3m Speaker cable 2x1.5 mm2, transparent
  • Pan screws 4x20 black, cross recess, 12 pieces
  • Plan for DIY kit

the crossover components (below),
to be mounted on a small wooden board.

  • 4x Audaphon MKP CAP Superior
  • 1x 0.7 mm air core coil
  • 1x 1.32 mm air core coil
  • 4x Metal-oxide resistor, 10W


Kit without cabinet,
price per speaker   EUR 274,00 excl. VAT: € 230.25 / $ 264.79

Kit with high-end crossover

The high-end kit comes with high-value ClarityCap MKP foil capacitors, type ESA in series to the tweeter. The inductances are baked varnished coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered.


Kit without cabinet,
price per speaker   EUR 310,00 excl. VAT: € 260.50 / $ 299.58

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 14,50 excl. VAT: € 12.18 / $ 14.01

universal PCBs

If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 220x155 mm, order no. I-8805002, price per unit:   EUR 11,70 excl. VAT: € 9.83 / $ 11.31
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview