The Cherlen 6 dB is a high-end 2 way bassreflex floorstanding speaker with Air Motion Transformer and 6 dB filter. The kit is delivered with the outstanding Audaphon AMT 1i and the excellent Morel TSCM 634. Cherlen has been developed by Dennis Frank and Daniel Gattig.
The filter is a 1st order frequency crossover. If you prefer a separation with second or third order we recommend Cherlen with 12/18 dB crossover..
The crossover consists of a 1st order high-pass filter (6 dB per octave slope) for the tweeter. The Woofers is connected to an 1st order low-pass filter (6 dB per octave slope).
The frequency response of this speaker is very balanced. The decay spectrum is nearly perfect. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are lower than 0.2% above 600 Hz and rises not over 0.6% at 95 dB at 1 m .
Kit without cabinet, price per speaker
EUR 842,00 excl. VAT: € 707.56 / $ 813.70
The high-end kit comes with a ClarityCap ESA capacitor of high quality. The inductance is a Mundorf copper foil coil for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered.
Kit with high-end-crossover without cabinet, price per speaker
EUR 879,00 excl. VAT: € 738.66 / $ 849.45
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit:
EUR 4,70 excl. VAT: € 3.95 / $ 4.54
We recommend one board per kit (2 boards per speaker pair)